Centsys D20 Smart

When it’s time to beef up security, you need real muscle, the kind that only the number one in access automation can deliver. Introducing the brand new D20 SMART industrial sliding gate motor. If your high-volume site calls for the kind of security that never backs down even when it’s pushed beyond the limits of other gate motors, make the intelligent choice and get the D20 SMART.

 

Product Features
Specifications
Downloads

Main Features:

  • Strong enough to move a 2t gate
  • Easy “drop-in” replacement for existing A10 sites
  • Installer-friendly design with easy access to mounting hardware, optimised cable routing and a dedicated accessory tray
  • Smooth and strong
  • SMART hardware and SMART connectivity provide the best experience for installers
  • Intelligent theft and break-in protection with an integral vibration sensor and patented theft-deterrent cage
  • More space and dedicated accessory tray for complementary solutions such as GSM devices
  • World-class reliability with a sealed gearbox and improved, more secure manual release mechanism
  • Die-cast aluminium gearbox coupled with a high-torque DC motor built for pure power and performance
  • Uncompromising security, uninterrupted convenience with 24V battery backup
  • Instant access to advanced, in-app diagnostics and logs, monitoring system health in real time
  • Accurate and safe position control incorporating reliable Hall Effect technology
  • Improved wire routing
  • SMART universal controller – compatible with all CENTSYS SMART sliding gate operators
D20 SMART
Input voltage 90V – 240V AC +/-10% @ 50Hz
Current consumption (Mains) 250mA
Battery charger current output 1.8A @ 27.4V +/-1%
Motor voltage 24V DC
Motor power supply Battery-driven (Standard Capacity – 2x 7.2Ah)
Current consumption (motor at rated load) 9A
Input / Output sink currents (Max accessory current draw)
I/O 1-4 100mA (12/24V)
I/O 5 and 6 3A (12/24V) 10sec Pulse
Motor push force – starting 52kgf
Motor push force – rated 39kgf
Gate mass – maximum 2000kg
Gate length – maximum 25m
Gate speed (varies with load) Up to 18m/min
Manual Override Lockable lever with key release
Drive Pinion 13T Module
Performance during battery backup (no mains power) with 2x 7.2Ah batteries Power Saving (15m/min 20kgf) | Normal (18m/min 20kgf)
Half day 101 | 55
Full day 80 | 45
Collision Sensing Electronic
Operating temperature range -15°C to +50°C
Onboard receiver type CENTSYS rolling code (Keelog encryption) multichannel
Receiver code storage capacity 1500 Remotes
Receiver frequency 433.92MHz
Degree of protection IP54
Mass of unit packed (with standard kit, but excl. rack and battery) 13Kg
Packaging dimensions (with standard kit, but excl. rack and battery) 350mm wide x 282mm deep x 470mm high

 

1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the
requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used

For any advice or enquiries we are only a phone call away. Our company is based on the Gold Coast and we service Australia wide.