Single Channel Receiver

Description

Main features

Programmable receiver for remote control access systems
Incorporates code hopping technology to offer ultimate security in a remote control
A unique randomly changing code is transmitted with each operation making it impossible to duplicate the system
Allows for both “Master” learning (using a master button to place the receiver in learn mode) and “Link” learning (fitting a link to the J1 jumper on the receiver)
433.92Mhz operating frequency
12V – 24V DC supply voltage required
Memory sufficient to hold 62 buttons
Easy Normally-open / Normally-closed relay contact options
Allows changes to the relay pulse time or a fixed latched time as required

Wiring Guide

Please contact Queensland Gate Automation if you need advice regarding wiring a receiver into a device. Please provide model type and name that receiver is being wired into
If power (12V – 24V DC) is not easily available from the device the Centsys receiver is being wired into then a separate 12VDC power supply is available from Queensland Gate Automation
As a general rule, Normally-open will be wired into the trigger contact point on the device being triggered (such as a garage door operator) and COM will be wired into COM

Button Selection

Any button from a Centsys remote can be used to be programmed into a single channel receiver (eg: button 1 can be used for a gate and button 2 can be used for a garage door operator with single channel receiver attached)

NOVA vs SMART