Back Up Memory Module

The Centsys Back Up Memory Module is a versatile tool that all professionals that work with automatic gate operators should carry in their tool kit.

Convenient rubber casing very much like a USB stick.

Used to make a back up and restore / transfer of all settings on Centsys D series operators, Sector boom operators and Smartguard Air Wirless Keypad.

Fantastic tool on high use sites where multiple remotes are in place.

 

SKU: QGA-020-1-1 Category:

Description

Main features

Backup Memory Module you can securely store all configured settings and learned in remote control buttons in a matter of seconds – and restore them just as effortlessly on your new controller.

Backing up

  • Step 1: Remove the DOSS harness and insert the memory module into the newly-available port.
  • Step 2: Enter programming mode, scroll to and select Menu 10: General Settings and select sub-menu 10.5: Backup EEPROM. All settings and learned in remote control buttons will now be backed up onto the memory module to be restored on a later stage. NOTE: this does NOT include limit settings, which will have to be reprogrammed.
  • Step 3: Plug the DOSS harness back into the port.

 

Restoring

  • Step 1: Remove the DOSS harness and insert the memory module into the newly-available port.
  • Step 2: Enter programming mode, scroll to and select Menu 10: General Settings and select sub-menu 10.4: Restore EEPROM. All settings and learned in remote control buttons will now be transferred to the new controller.
  • Step 3: Plug the DOSS harness back into the port.
  • Step 4: Initiate the limit setup procedure.
Menu